ASROCK P43DE3L, Быстрое руководство по установке

Страница: 18 / 31

1 8 1 8
1 8 1 8 1 8
ASRock P43DE3L Motherboard
EnglishEnglishEnglishEnglishEnglish
2.7 2.7 2.7 2.7 2.7 Driver Installation Guide Driver Installation Guide Driver Installation Guide Driver Installation Guide Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical
drive first. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from up to bottom
side to install those required drivers. Therefore, the drivers you install can work
properly.
4-Pin ATX 12V Power Supply Installation
Though this motherboard provides 8-pin ATX 12V power connector, it can still
work if you adopt a traditional 4-pin ATX 12V power supply. To use the 4-pin
ATX power supply, please plug your power supply along with
Pin 1 and Pin 5.
8 5
4 1
2.8 2.8
2.8 2.8 2.8
Installing Windows Installing Windows
Installing Windows Installing Windows Installing Windows
® ®
® ® ® 7 / 7 64-bit / Vista 7 / 7 64-bit / Vista
7 / 7 64-bit / Vista 7 / 7 64-bit / Vista 7 / 7 64-bit / Vista
TM TM
TM TM TM /////
Vista Vista
Vista Vista
Vista
TM TM
TM TM
TM
64-bit / XP / XP 64-bit Without RAID Functions 64-bit / XP / XP 64-bit Without RAID Functions
64-bit / XP / XP 64-bit Without RAID Functions 64-bit / XP / XP 64-bit Without RAID Functions
64-bit / XP / XP 64-bit Without RAID Functions
If you want to install Windows ® 7 / 7 64-bit / Vista TM / Vista TM 64-bit / XP / XP 64-bit OS
on your SATA / SATAII HDDs without RAID functions, please follow below procedures
according to the OS you install.
2.8.1 Installing Windows 2.8.1 Installing Windows
2.8.1 Installing Windows 2.8.1 Installing Windows 2.8.1 Installing Windows
® ® ® ® ® XP / XP 64-bit Without RAID XP / XP 64-bit Without RAID
XP / XP 64-bit Without RAID XP / XP 64-bit Without RAID XP / XP 64-bit Without RAID
Functions Functions
Functions Functions Functions
If you want to install Windows ® XP / XP 64-bit OS on your SATA / SATAII HDDs
without RAID functions, please follow below steps.
AHCI mode is not supported under Windows
®
XP / XP 64-bit OS.
STEP 1: Set up BIOS.
A. Enter BIOS SETUP UTILITY Advanced screen Storage Configuration.
B. Set “SATAII Configuration” to [Enhanced], and then in the option “Configure
SATAII as”, please set the option to [IDE].
STEP 2: Install Windows ® XP / XP 64-bit OS on your system.
Using SATA / SATAII HDDs without NCQ function (IDE mode)