ASROCK P43DE3L, Быстрое руководство по установке

Страница: 15 / 31

1 5 1 5 1 5 1 5 1 5
ASRock P43DE3L Motherboard
EnglishEnglishEnglishEnglishEnglish
USB 2.0 Headers Besides six default USB 2.0
(9-pin USB6_7)
ports on the I/O panel, there are
(see p.2 No. 21)
two USB 2.0 headers on this
motherboard. Each USB 2.0
header can support two USB
2.0 ports.
(9-pin USB8_9)
(see p.2 No. 17)
2.6 Onboard Headers and Connectors 2.6 Onboard Headers and Connectors
2.6 Onboard Headers and Connectors 2.6 Onboard Headers and Connectors
2.6 Onboard Headers and Connectors
Onboard headers and connectors are NOT jumpers. Do NOT place
jumper caps over these headers and connectors. Placing jumper caps
over the headers and connectors will cause permanent damage of the
motherboard!
Serial ATA (SATA) Either end of the SATA data cable
Data Cable can be connected to the SATA /
(Optional)
SATAII hard disk or the SATAII
connector on this motherboard.
SATAII_1 (Port 0)
SATAII_2 (Port 1)
SATAII_3 (Port 2)
SATAII_4 (Port 3)
SATAII_5 (Port 4)
SATAII_6 (Port 5)
connect the blue end
to the motherboard
Primary IDE connector (Blue)
(39-pin IDE1, see p.2 No. 9)
Note: Please refer to the instruction of your IDE device vendor for the details.
Serial ATAII Connectors These six Serial ATAII (SATAII)
(SATAII_1 (Port 0):
connectors support SATA data
see p.2, No. 13)
cables for internal storage
(SATAII_2 (Port 1):
devices. The current SATAII
see p.2, No. 14)
interface allows up to 3.0 Gb/s
(SATAII_3 (Port 2):
data transfer rate.
see p.2, No. 15)
(SATAII_4 (Port 3):
see p.2, No. 16)
(SATAII_5 (Port 4):
see p.2, No. 18)
(SATAII_6 (Port 5):
see p.2, No. 19)
connect the black end
to the IDE devices
80-conductor ATA 66/100/133 cable