5 7
5 7
5 7
5 7
5 7
Processor Maximum Voltage
It will display Processor Maximum Voltage for reference.
Multiplier/Voltage Change
This item is set to [Auto] by default. If it is set to [Manual], you may adjust the
value of Processor Frequency and Processor Voltage. However, it is
recommended to keep the default value for system stability.
BIOS SETUP UTILITY
Main
Advanced
H/W Monitor
Boot
Security
Exit
Overclocking may cause
damage to your CPU and
motherboard.
It should be done at
your own risk and
expense.
Select Screen
Select Item
Enter Go to Sub Screen
F1
General Help
F9
Load Defaults
F10
Save and Exit
ESC
Exit
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
OC Tweaker
EZ Overclocking
Load Optimized CPU OC Setting [Press Enter]
CPU Configuration
CPU Frequency (MHz)
PCIE Frequency (MHz)
Overclock Mode
[200]
[100]
[Auto]
Spread Spectrum
Advanced Clock Calibration
Processor Maximum Frequency
North Bridge
Processor Maximum Voltage
Maximum Frequency
x10.5 2100 MHZ
x9.0 18
1.2500 V
00 MHz
[Auto]
[Disabled]
Multiplier/Voltage Change
CPU Frequency Multiplier
CPU Voltage
NB Frequency Multiplier
[Manual]
[x0.5 100 MHz]
[0.6000 V]
[x5.0 1000 MHz]
CPU Frequency Multiplier
For safety and system stability, it is not recommended to adjust the value of
this item.
CPU Voltage
It allows you to adjust the value of CPU voltage. However, for safety and
system stability, it is not recommended to adjust the value of this item.
NB Frequency Multiplier
For safety and system stability, it is not recommended to adjust the value of
this item.
NB Voltage
It allows you to adjust the value of NB voltage. However, for safety and
system stability, it is not recommended to adjust the value of this item.
HT Bus Speed
This feature allows you selecting Hyper-Transport bus speed. Configura-
tion options: [Auto],[x1 200 MHz] to [x5 1000 MHz]. If you adopt Phenom
CPU, the configuration options are: [Auto], [x1 200 MHz] to [x13 2600 MHz].
The configuration options depend on the CPU you adopt.
HT Bus Width
This feature allows you selecting Hyper-Transport bus width. Configura-
tion options: [Auto], [8 Bit] and [16 Bit].
