ASROCK K8UPGRADE-NF3, Руководство по установке

Страница: 9 / 96

9 99 99
ASRock K8Upgrade-NF3 Motherboard
EnglishEnglishEnglishEnglishEnglish
This yellow-colored Future CPU Port is not an AGP slot! Please do
NOT insert any AGP card into it!
CPU Type Jumper Settings
754-Pin CPU
(Default)
939-Pin CPU
(Using add-on
ASRock 939CPU
Board )
/ 940-Pin (M2)
CPU
(Using add-on
ASRock M2CPU
Board )
J1 J2
J3 J4
J5 J6
J7 J8
J15
J9
J10
J1 J2
J3 J4
J5 J6
J7 J8
J15
J9
J10
NOTE
When adjusting the jumper settings, you may use the tool, Jumper Cap Remover, to help you
removing the jumper caps more easily. This Jumper Cap Remover is bundled in your motherboard
package, and please follow the “Jumper Cap Remover Instruction” to use it properly.
PCI Slots: PCI slots are used to install expansion cards that have the 32-bit PCI
interface.
AGP slot: The AGP slot is used to install a graphics card. The ASRock AGP slot has
a special design of clasp that can securely fasten the inserted graphics
card.
Please do NOT use a 3.3V AGP card on the AGP slot of this
motherboard! It may cause permanent damage! For the voltage infor-
mation of your AGP card, please check with the AGP card vendors.