English
29
H510M/ac
Step 3
Move the standoff based on the
module type and length.
The standoff is placed at the nut
location B by default. Skip Step 3 and
4 and go straight to Step
5
if you are
going to use the default nut.
Otherwise, release the standoff by
hand.
Step 4
Peel off the yellow protective film on
the nut to be used. Hand tighten the
standoff into the desired nut location
on the motherboard.
Step 5
Align and gently insert the M.2
(NGFF) SSD module into the M.2
slot. Please be aware that the M.2
(NGFF) SSD module only fits in one
orientation.
Step 6
Tighten the screw with a screwdriver
to secure the module into place.
Please do not overtighten the screw as
this might damage the module.
B
A
B
A
NUT1
NUT2
B
A
B
20
o
A
B
Содержание H510M/ac
Страница 11: ...English 7 H510M ac Step 4 Fasten the screw nuts to secure the connec tors ...
Страница 20: ...English 16 4 5 3 ...
Страница 22: ...English 18 2 2 Installing the CPU Fan and Heatsink 1 2 C P U _ F A N ...
Страница 24: ...English 20 1 2 3 ...
