ASROCK EP2C621D24LM-AB, Руководство пользователя

Страница: 34 / 97

28 29
English
PMBUS Mode Jumpers
(3-pin PMBUS_SEL_CLK1)
(3-pin PMBUS_SEL_DAT1)
(3-pin PMBUS_SEL_ALT1) PMBus connected to BMC
(Default)
PMBus connected to PCH
SATA DOM Power Jumper
(3-pin SATAPWR1)
SATA DOM (SSATA_1)
requires 5V power supply
SATA DOM (SSATA_1)
does NOT require 5V power
supply (Default)
SATA DOM Power Jumper
(3-pin SATAPWR2)
SATA DOM (SSATA_0)
requires 5V power supply
SATA DOM (SSATA_0)
does NOT require 5V power
supply (Default)
Consult the documentation that comes with your SATA DOM and check whether or not
Pin 7 requires 5V power supply.
If the connected SATA DOM requires 5V power supply, move the jumper caps placed on the
SATA DOM Power Jumper (SATAPWR1 / SATAPWR2) from pins 2-3 (default) to pins 1-2.
If the connected SATA DOM does NOT require 5V power supply, connect the SATA DOM
power cable to the SATA DOM power header (SATAPWR1 / SATAPWR2) and there is no
need to change the default jumper setting of the SATA DOM Power Jumper (pins 2-3).
Warning! Incorrect setting of the SATA DOM Power Jumper (SATAPWR1 / SATAPWR2)
may cause damage to the motherboard or your SATA DOM.