50
English
Share Memory
Configure the size of memory that is allocated to the integrated graphics processor when
the system boots up.
Render Standby
Power down the render unit when the GPU is idle for lower power consumption.
Onboard LAN
Enable or disable the onboard network interface controller.
Onboard HD Audio
Enable/disable onboard HD audio. Set to Auto to enable onboard HD audio and
automatically disable it when a sound card is installed.
Front Panel
Select Front Panel type.
Onboard HDMI HD Audio
Enable audio for the onboard digital outputs.
WAN Radio
Enable/disable the WiFi module's connectivity.
Deep Sleep
Configure deep sleep mode for power saving when the computer is shut down.
Restore on AC/Power Loss
Select the power state after a power failure. If [Power Off] is selected, the power will
remain off when the power recovers. If [Power On] is selected, the system will start
to boot up when the power recovers.
Good Night LED
By enabling Good Night LED, the Power/HDD LEDs will be switched off when the
system is on. It will also automatically switch off the Power and Keyboard LEDs
when the system enters into Standby/Hibernation mode.
Active LVDS
This allows you to enable or disable the LVDS.