1 8
1 8
1 8
1 8
1 8
ATX Power Connector
Please connect an ATX power
(24-pin ATXPWR1)
supply to this connector.
(see p.10, No. 8)
12
1
24
13
CPU Fan Connector
Please connect a CPU fan cable
(3-pin CPU_FAN1)
to this connector and match
(see p.10 No. 4)
the black wire to the ground pin.
1. High Definition Audio supports Jack Sensing, but the panel wire on
the chassis must support HDA to function correctly. Please follow the
instruction in our manual and chassis manual to install your system.
2. If you use AC’97 audio panel, please install it to the front panel audio
header as below:
A. Connect Mic_IN (MIC) to MIC2_L.
B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L.
C. Connect Ground (GND) to Ground (GND).
D. MIC_RET and OUT_RET are for HD audio panel only. You don’t
need to connect them for AC’97 audio panel.
E. Enter BIOS Setup Utility. Enter Advanced Settings, and then select
Chipset Configuration. Set the Front Panel Control option from
[Auto] to [Enabled].
+
5
V
DU
MMY
DU
MMY
SP
EAKE
R
1
G
N
D
P
W
RB
TN#
P
LE
D
-
P
LE
D
+
DU
MMY
R
E
S
ET#
G
N
D
H
D
LE
D
+
H
D
LE
D
-
1
System Panel Header
This header accommodates
(9-pin PANEL1)
several system front panel
(see p.10 No. 11)
functions.
Chassis Speaker Header
Please connect the chassis
(4-pin SPEAKER 1)
speaker to this header.
(see p.10 No. 13)
Chassis Fan Connectors
Please connect a chassis fan
(3-pin CHA_FAN1)
cable to this connector and
(see p.10 No. 2)
match the black wire to the
ground pin.
(3-pin CHA_FAN2)
(see p.10 No. 9)
G
N
D
+12V
CHA_FAN_
SP
EE
D
GND
+1
2
V
C
HA_FAN_SPEED
