ASROCK A330ION, Руководство пользователя

Страница: 36 / 44

3 6 3 6
3 6 3 6 3 6
BIOS SETUP UTILITY
SATA Configuration
Configure onboard
serial ATA Controller.
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Advanced
Onboard SATA Controller
[Enabled]
Select Screen
Select Item
+- Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
Select Screen
Select Item
+- Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
SATAII_1
SATAII_2
SATAII_3
SATAII_4 [Hard Disk]
[Not Detected]
[Not Detected]
[Not Detected]
SATA Operation Mode [IDE]
3.4.4 3.4.4 3.4.4 3.4.4 3.4.4 SA SA SA SA SATTTTTA Configuration A Configuration A Configuration A Configuration A Configuration
AHCI (Advanced Host Controller Interface) supports NCQ and
other new features that will improve SATA disk performance
but IDE mode does not have these advantages.
Onboard SATA Controller
Use this item to enable or disable the “Onboard SATA Controller” feature.
SATA Operation Mode
Use this item to adjust SATA Operation Mode. The default value of this
option is [IDE]. If you want to operate RAID function on SATA / SATAII HDDs,
please select [RAID]. Configuration options: [IDE], [AHCI] and [RAID].
* If you select [RAID] mode, SATA / SATAII HDDs can not be accessed until you finish
configuring RAID functions in NVIDIA BIOS / Windows RAID Utility.
* If you install OS on SATA / SATAII HDDs, please do not change the setting of this
item after OS installation.
IDE Device Configuration
You may set the IDE configuration for the device that you specify. We will
use the “IDE1 Master” as the example in the following instruction, which can
be applied to the configurations of “IDE1 Slave” as well.