1 0
5.
When the RAID0 array’s configuration is finished, click the Create
button. Then a “Create Stripe RaidSet” dialog will pop up.
<Option Description>
Source:
The first selected disk.
Target:
The second selected disk.
Create Only:
Select this option will destroy all data on all
the selected disks and create a clean stripe
array without any data on it.
Source is not
Select this option will split data from source
a boot device:
disk into all the selected disks. In this option,
the source cannot be bootable.
Source is a boot
Select this option will split data from source
device:
disk into all the selected disks. In this option,
the source can be bootable.
OK:
Start the operation.
<Disk Copy Remaining Sector>:
Show the remaining splitting data.
6.
Next, you may click Cancel button to leave, or click OK button to
continue after the operation being selected. Different warning mes-
sages will pop up according to the option you select. The warning
messages are similar to JBOD array creation but the operation is
“Split data into Raid0”.
Содержание 939S56-M
Страница 17: ...17 HD information...
