2 7
2 7
2 7
2 7
2 7
DRAM CAS# Latency
Use this item to adjust the means of memory accessing. Configuration
options: [Auto], [2.5], [2], and [3].
DRAM Command Rate
Use this to select among [2T Command] and [1T Command] for DRAM
Command Rate. The default value is [2T Command].
DRAM Voltage
Use this to select among [Normal] and [High] for DRAM Voltage. The default
value is [Auto].
AGP Voltage
Use this to select among [Normal] and [High] for AGP Voltage. The default
value is [Auto].
Primary Graphics Adapter
This allows you to select [PCI] or [AGP] as the primary graphics adapter.
The default vaule is [PCI].
AGP Aperture Size
It refers to a section of the PCI memory address range used for graphics
memory. It is recommended to leave this field at the default value unless the
installed AGP card’s specifications requires other sizes.
AGP Mode
The default value of this feature is set to [Auto]. If you install an 8X-AGP
card on this motherboard, you may select [Auto], [8X] or [4X] as the AGP
mode. If the installed AGP card is a 4X-AGP card, then you may set the AGP
mode as [Auto], [4X], [2X], or [1X].
AGP Fast Write
This allows you to enable or disable the feature of AGP fast write protocol
support.
Onboard AGP Share Memory
You may select [Auto], [8MB], [16MB], [32MB], or [64MB] as the Onboard
AGP share Memory. The default value of this feature is set to [Auto]. When
the total memory is equal or above 256MB, the share memory size will be
[64MB]; otherwise, please set the share memory size to [32MB].
PCI Delay Transaction
DRAM Frequency
If [Auto]
is selected, the motherboard will detect the memory module(s)
inserted and assigns appropriate frequency automatically. You may also
select other value as operating frequency: [133MHz (DDR 266)],
[166MHz (DDR 333)], [200MHz (DDR 400)].
Flexibility Option
The default value of this option is [Disabled]. It will allow better tolerance for
memory compatibility when it is set to [Enabled].
