8
9
www.aidacarelifters.com.au
swift
swift
9. Insert left side frame into the base unit. Repeat for right side.
10. Using the washers and spacers provided, loosely fit the knee pad to the side
frame ensuring that the knee pad is positioned in correct position.
11. Lock knee pad in place by securing all 4 x bolts in place. The knee pad should not
slide up or down if positioned correctly.
12. Locate sling anchor bolt.
9
10
11
12
13
14
13. Insert sling anchor bolt into side of push handle. Tighten and secure pin by
locking into foam centre handle. This bolt also secures the foam handle in place.
14. Secure the side frame to the base unit by inserting the large washer and locking
in place with the M10 socket head bolt. Repeat on both sides.
15. The unit is now fully assembled.
