Aspire Swift Patient Mover, Руководство пользователя

Страница: 7 / 12

12 13 www.aidacarelifters.com.au
swift swift
1. Position the Swift Patient Mover close to the seat or bed.
2. Spread the legs on the Swift Patient Mover to give greater stability. Do this by
pushing down on the pedal.
3. Apply the brakes on the rear castors, by pressing down on the locking tab.
4. Ask the user to stand up using the Hand Rail as assistance. Lift up the Seat Pads.
5. The user can now slowly lower themselves in to the seat using the Hand Rail
for assistance. The carer should hold the Swift Patient Mover with by the push
handles during this operation.
6. The user should now remove their feet from the footplate and the carer can
remove the castor brakes and wheel the Swift Patient Mover away.
3
4
5
Sling Attachment
Knee Pad Adjustment
Sling and transfer belt attachments are provided for users who require extra support.
See page 16 for Aspire Slings approved for use on the Swift Patient Mover.
1. The Knee Pad on the Swift Patient Mover can be adjusted for height and angle.
To adjust the angle, loosen the two dome head nuts with a spanner on both sides
of the frame (as shown below). Reposition the Knee Pad to the required angle
and then retighten the nuts using the spanner.
2. To adjust the height of the Knee Pad, loosen the four screws with an allen key
(as shown below). Reposition the Knee Pad to the required height then
retighten using the allen key.
1
2
2
Transferring From the Swift Patient Mover