17
16
comfimotion.com.au
Using a box cutter, unhook all components from the base of the bed (retainers, power cord, hand
control and castors).
Remove bed from carton and position on flat surface or a Bed Moving Trolley for easy setup. Ensure the bed
is placed TOP DOWN, so all components (hand control, retainers, castors & power cord) can be removed
easily from the underside of bed.
1
2
HOW TO UNPACK & INSTALL
RELAX / CARE BEDS
7.1 BEDS
DO NOT USE a box cutter, stanley knife or sharp
implement when opening the carton.
Doing so may cause irreversible damage to the
product and void warranty.
b) Standard Castors
c) Accessibility Castors
ii. Fasten using an 8mm Allen Key.
Repeat for each castor.
i. Insert the protruding castor
stem into the hole located
at each corner of the bed.
ii. Fasten by hand and tighten
with spanner. Repeat for each
castor.
i. Insert the protruding castor
stem into the hole located at
each corner of the bed.
a) Standard or Low Profile Bed Legs
i. Insert the protruding stem into the hole
located at each corner of the bed.
ii. Fasten by hand and tighten with spanner.
Repeat for each leg.
3
HOW TO FIT
IMPORTANT!
The leg or castor selection (a, b, or c) will determine the minimum bed base height (not
including the mattress).
IMPORTANT!
Beds should remain on their side when installing the legs or castors.
2 X PEOPLE REQUIRED:
We strongly recommend having an additional person to hold the bed frame
whilst installing the legs or castors to avoid tipping.
TWIST
TWIST
TWIST
LEGS / CASTORS
7.1.1 LEG TYPE
Castors or Bed Legs
Retainers
Hand Control
Power Cord
