15
14
comfimotion.com.au
6.2 CARE BED - WIRED HANDSET
a.
Backrest:
Adjusts the backrest (up to 65º) providing
postural support, easing symptoms of reflux, respiratory
conditions, snoring and sleep apnoea.
d.
Hi / Lo:
Raise and lowers the height of the bed. Consider
lowering the bed to assist with manual handling and help
mitigate falls risk.
b.
Legrest:
Adjust the legrest to promote better
circulation, relieving tired, swollen and/or painful limbs.
e.
Seating and Dining:
Bed transforms into a seated position,
ideal for upright dining as well as bed entry and exit.
c.
Trendelenburg (-12º) and Reverse (12º):
This
position helps facilitate blood pressure
localisation as well as promote low cardiac
output. This medically prescribed position is not
recommended for those with heart issues or
those susceptible to strokes.
f.
Night Assist:
Luminous underbed halo (lighting) for
safe bed entry and exit throughout the night.
g.
Flat / Sleep Mode:
Resets to a neutral flat position,
simultaneously lowering the bed to the minimum
height.
To connect the handset:
Insert and secure the handset cable into the port
labelled ‘HANDSET’ (located in the control box underneath the bed).
6.2.1 SETTING UP YOUR CARE HANDSET
Flat / Sleep Mode
(Resets & Lowers)
Night Assist
(Underbed lighting)
Legrest
(Up & Down)
Backrest
(Forwards & Back)
Trendelenburg
& Reverse
Hi & Lo
(Raise & Lower)
Seating / Dining
(Seated Position)
a
b
c
e
d
g
f
ComfiMotion Beds come securely packaged in a cardboard carton. Inside the carton you will find the
castors, retainers and hand control safely secured underneath the bed frame. The entire bed is also
wrapped for further protection. ComfiMotion
Beds should arrive to you in pristine condition, ready for
immediate assembly and installation.
When opening the carton, ensure it is done in a safe and careful manner.
DO NOT USE a box cutter or sharp implement down the centre of the carton as this
may damage the product.
7. ASSEMBLY INSTRUCTIONS
ComfiMotion Beds are a large piece of equipment requiring special attention and
careful handling at all times.
WARNING
WARNING
For easy installation
we recommend using
the ComfiMotion Bed
Moving Trolley.
TIPS
Adjustable
Shifter/Spanner
12mm
5mm
Phillips Head
5mm, 8mm
Stanley Knife
Carton Contents:
• 1 x ComfiMotion Bed (CARE or RELAX)
• 1 x Handset
• 1 x Headboard (Sold Separately)
• 4 x 75mm Locking Castors (CARE)
• 4 x Bed Legs (RELAX)
• 4 x Side Mattress Retainers and Hardware
• 1 x Foot End Mattress Retainer
GETTING STARTED
PRESS & HOLD
to initiate function
RELEASE
button
to stop
