07-10-2018
Page 2/3
aspenhome
R
ASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
ITEM NO: I201-412 Queen Estate Panel HB
I201-402 Queen Rails
I201-403 Queen Low Profile FB
STEP 1: Put the headboard face down
on a soft surface. Attach the left leg
and right leg to headboard by using 8
bolts(A), lock washers(C) and flat
washers(D).
STEP 3: Attach the center support
leg to headboard and wood stretcher
by using 4 bolts(B), lock washers(C)
and flat washers(D).
STEP 2: Attach the wood stretcher to the
legs by using 4 bolts(B), lock washers(C)
and flat washers(D).
UPPER
position
Slat bearer
Side Rail
STEP 4: The rails ship with the slat bearers assembled in UPPER position for a storage set up and
must be moved to LOWER position for the non-storage set up. Move the slat bearers down to the
LOWER position. Remove the bolts(10 pcs) and wood screws(10 pcs) from the slat bearers and side
rails as shown below. Then re-attach the slat bearers to the side rails in desired position with bolts,
lock washers, flat washers and wood screws.
Caution: Do not over tighten bolts as this may
loosen the threaded inserts in the side rails.
LOWER
position
Wood Screw
A
C
D
E
HB Backside
Right Leg
Left Leg
Wood Stretcher
B
C
D
E
B
C
D
E
