07-10-2018
Page 3/4
aspenhome
R
ASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
STEP 5: Screw the bolts(F) into HB & FB. Align the bolts with the holes in the end of side rails and
attach the side rails to HB & FB using flat washer(G), lock washers(H) and nuts (I).Then use a hex
wrench(J) to tighten all the nuts.
F
G
H
I
J
The outside holes match to 6/6 bed rails -406,
the inside holes match to 6/0 bed rails -410.
Side Rail
Slat bearer
Side Rail
Side Rail
ITEM NO: I201-415 King Estate Panel HB
I201-406 King Rails
I201-410 Cal King Rails
I201-407 King Low Profile FB
Make sure the slat bearer is
in the LOWER position.
STEP 6: Attach the support legs with leveler to the slats.
Adjust the levelers on bottom of support legs when necessary.
Support Leg
Leveler
This End Up
Slat
STEP 7: Arrange the slats on the slat bearers
equally and attach to the slat bearers with
wood screws (K).
Wood Screws (K)
STEP 8: For Cal King bed, insert poly caps into the holes on
headboard and footboard. For regular King bed, skip this step.
Poly Cap (M)
