07-10-2018
Page 4/5
aspenhome
R
ASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
ITEM NO: I201-415 King Estate Panel HB
I201-406 King Rails
I201-410 Cal King Rails
I201-407D King Storage FB
Wood Screws (K)
STEP 8: Arrange slats on the slat bearers and then
lay the decking on top of the slats. Make sure the
top and bottom slats are situated underneath the
pre-drilled holes as shown below in STEP 10.
Remove the decking and attach slats to the slat
bearers with wood screws (K).
Filler
Notch
STEP 9: For the Cal King bed, both filer boards are notched.
Using a utility knife only cut off the small piece at the notch on
one of the filler boards. This cut off filler board will be placed at
the foot of the bed going from left to right as shown on the right
side below in STEP 10. For the standard King bed, skip this step
and arrange the decking boards on shown on the left side below.
STEP 10: Put the decking over the slats, secure decking to the slats with wood screws (R) through
the pre-drilled holes in the decking as shown below.
Decking
Decking
Decking
Fi
ller
Fi
ller
Decking
Decking
Decking
Fi
ller
Make sure that there is a slat
under the pre-drilled hole.
R
Decking
Pre-drilled hole
Short Fi
ller
Standard King Bed
Cal King Bed
STEP 11: For Cal King bed, insert poly caps into the holes on
headboard and footboard. For regular King bed, skip this step.
Poly Cap (M)
