Aspen Avionics EFD1000 E5 Скачать руководство пользователя страница 141 | Manualshive

Страница: 141 / 226

Aspen Avionics EFD1000 E5 Скачать руководство пользователя страница 141

EFD1000 E5 Dual Electronic Flight Instrument (EFI) Install Manual

DOCUMENT # 900-00041-001

PAGE 141-226

REVISION D

© Copyright 2019 Aspen Avionics Inc.

Note: “CLEAR” will render a tape marking (Speed Band) with no color, which will replicate certain

Vmo/Mmo mechanical airspeed indicators such as ones with a black background with white
tick marks and numbers.

INSTALLATION MENU PAGE – IAS CONFIG E

Feature

Options

Actual Setting

SPD Band 2

YELLOW, CLEAR

SPD Band 3

GREEN, WHITE, CLEAR

SPD Band 4

WHITE, CLEAR

Not Used

Not Used

Notes:

10.4.6.6

Installation Menu Page - IAS CONFIG F

IAS UNITS - Set per Aircraft Flight Manual.
TAPES and VPSD EDIT - See section 10.4.7 for definitions of settings.

INSTALLATION MENU PAGE – IAS CONFIG F

Feature

Options

Actual Setting

IAS UNITS

kts, mph

TAPES

UNLOCKED, LOCK OFF, LOCK ON

VSPD EDIT

UNLOCKED, LOCKED

Not Used

Not Used

Notes:

10.4.6.7

Installation Menu Page - IAS CONFIG G

IAS DISPLAY – DISABLE will remove the airspeed bug from the tape, the upper left
window, and the left knob. The window will continue identify the units (KTS or MPH)
displayed on the airspeed tape.
ALT DISPLAY – DISABLE will remove the altitude bug from the tape, the upper right
window, and the right knob. It also removes the MIN field.
BARO DISPLAY – When disabled will remove the BARO setting from the right knob and
the BARO display from the center Databar. The Disable setting will also remove the
baro-corrected altitude label from the A429 and RS-232 busses.
VSI DISPLAY – Always On means the tape will always be displayed. Always Off means
the tape is always turned off. AUTO means the tape will declutter when the vertical
speed is b/-100fpm. ALWAYS ON or AUTO are the only settings permitted
under this STC.

CAUTION: Setting BARO DISPLAY to DISABLE may only be used when the TAPES are Locked Off.

«
...
139
140
141
142
143
...
»

Содержание EFD1000 E5



































































































































































































































Отзывы:

Нет отзывов