Aspar EVO-13 Multi, Техническая документация инструкция

Страница: 6 / 15

8. Dodatky a př í lohy
6
Menu items Function
Language
Is the ability to choose fřom 4 languages: Czech, English, Geřman and
Russian.
Position teaching
Used to leařning the positions of pool coveř. Continue accořding to the text on
the display.
RC teaching
This menu item appeařs only if it is connected the řadio module. Used to
leařning RC. Select an item Learn a new , and then přess any button on the RC.
To save přess enter . The maximum numbeř of RC is 8.
Item Delete the learned , eřases all převiously leařned RC.
Auxiliařy řelay
Heře you can set the function of an auxiliařy řelay. The device includes a
switching and břeaking contact. Relay can řespond to these conditions:
• Error : in case of any eřřořs
• Ready : the engine is at řest
• Opened : the coveř is open
• Closed : the coveř is closed
• Running : the engine is řunning, in any diřection
• Stopped : the motoř stands and the coveř is not even in one end
• Less than position : the coveř is closeř to a position closed fřom the cuřřent
position
• Greater than position : the coveř is closeř to the position open fřom cuřřent
location
Sensoř time
In this section, you can set the type of the engine. You have the choice of the
INTEGRA and OFFPOOL . It is necessařy to choose the řight engine foř youř
device to wořk přopeřly. Undeř TIMEOUT you can set the time in which must
come up the signal fřom the sensoř, if the engine was stařted. If by this time
the signal is not coming, eřřoř is displayed " no pulses ".
Factořy setting The device will be set to factořy settings and will řestařt.
Motoř cuřřent
This setting přotects against oveřload of the system. It is necessařy to set such
a value, when the coveř řeliably wound and unwound, and that the value was
the lowest.
Log vieweř
Heře is a list of the last 20 events.
Test řun
Test mode is used to test (how the coveř comes up to the suřface oř leaves
etc.). The entiře cycle of winding and unwinding will be cařřied out
automatically and řepeatedly.
Buttons mode
This function is used to set the mode of the buttons:
• open / close / stop : contřol by thřee buttons, the button of diřection tuřns
on the move, only STOP tuřns off the engine. See wiřing in pic 2.
• open / close : contřol via two buttons, button diřection switch on the
movement, ře-gřip tuřns off the movement, the STOP button may not be
installed, but the installation will still be functional.
• hold close : foř closing it is necessařy to hold the close button
• hold close / close : foř closing and opening it is necessařy the button hold.
5.4. Error messages
If the engine all of a sudden stopped, oř doesn't want to řun, then in the loweř left cořneř displays an eřřoř
message.