
Fog the Engine
——Spray light oil into the cylinder through the spark plug
hole.
Check and Lubricate Cables/Grease
——Inspect all cables and lubricate.
Battery Maintenance
——Remove the battery and store in a dry place. Apply
Dielectric Grease to the terminal bolts and terminals. Often charge the battery.
Storage Area/Covers
——Set tire pressure and safely support the UTV with
the tires 25-50 mm off the ground. Be sure the storage area is well ventilated.
Cover the machine with a UTV cover.
NOTE: Do not use plastic or coated materials. They do not allow enough
ventilation to prevent condensation, and may promote corrosion and oxidation.
TRANSPORTING THE VEHICLE
Whenever the UTV is to be transported, the following measures should be
taken.
1. Turn off the engine and remove the key.
2. Be sure the fuel cap, oil cap and seat are installed correctly.
3. Always tie the frame of the UTV to the transporting until securely using
suitable straps or rope.
4. Always place the transmission in gear and lock the parking brake.
Содержание T-Boss570
