ASP SlimScan BT, Полное руководство

Страница: 9 / 43

SlimScan BT Full Manual 5
Installing the batteries
The scanner batteries have already been charged and fitted to your
SlimScan unit for you. If you need to fit (or replace) the batteries,
please follow this procedure.
Note: Most battery problems are caused by incorrect charging.
DO NOT replace the batteries unless you’re advised to do so by the
ASP service department!
To open the battery compartment, loosen the two screws enough to
remove the battery cover, as shown below. Note that it’s not necessary
to fully remove the screws.
Paying careful attention to the + and – signs inside the battery
compartment, fit the battery one at a time, as shown below. Note that
fitting the batteries incorrectly can damage the scanner and/or the
batteries – such damage will not be covered under warranty.
Put back the battery cover, and tighten the screws.