ASP SlimScan BT, Полное руководство

Страница: 8 / 43

4 SlimScan BT Full Manual
Data transfer modes
The SlimScan BT supports the following four data transfer modes.
Using the programming barcodes later in this manual, you can change
the data transfer mode to suit your preference.
Normal (default)
In this mode, the scanner does not store data. When the scanner is
within Bluetooth connection range, scanned data is transferred to the
PC immediately, and a good beep sound is emitted. If the scanner is
out of range and a barcode is scanned, the scanner sounds four high-
tone beeps, indicating a data transfer error. This scan will be lost.
Out-of-range mode
The scanner operates normally when in range of the cradle. If the
scanner is out of range and a barcode is scanned, the scanner will flash
the blue LED bars to indicate barcode reading success, but will sound
four high-tone beeps to indicate that it is out of range.
The scanner will then store the barcode data into memory, and flash the
green LED twice per second. When scanner comes back into
communication range, stored data is sent when the next barcode is
scanned. When the stored data is sent to the PC, a medium-tone is
sounded to indicate that the data was transmitted successfully.
Standard batch mode
In this mode, all scanned data is stored into memory, whether the
scanner is within communication range or not. Stored data is
transferred to the PC only after the “
Send Batch Data ” barcode is
scanned.
Cradle contact batch mode
This mode is the same as Standard Batch Mode, except that scanned
data is transferred to the PC when the scanner is put into the cradle.
When the scanner is snapped into the cradle, a short-tone beep will
sound to confirm that the scanner is fitted into the cradle correctly, then
the blue scanner LED bars will flash three times and then stay on while
the data is being transferred. Once the transfer is completed, a long
medium-tone beep will sound.
Note that in this mode, the scanner does not need to be paired with the
cradle to transfer the scanned data. This means that more than one
scanner can be downloaded using just one cradle.
Note: After scanned data is transferred to the PC, the scanner
automatically clears the data from the scanner memory.