FXSO H.323 Gateway User Manual
Document Ver.: 105
Release Dec, 2004
77
4 = R F C 2 8 3 3 .
-prefixsw User defined local zone prefix switch (0=OFF, 1=ON).
-prefixdisab Local zone prefix disable character (one character
from 0~9, *, or NONE('-' key)).
-usrdefprefix User defined local zone prefix (0 ~ 20 digits).
-codec Codec select method (0=Caller, 1=Master).
-reverse Reverse function. (0=disable, 1=Enable).
-localrbt Local ring back tone generation (0=disable, 1=Enable).
-roundtrip Disconnect no connect in line busy (0=disable, 1=Enable).
-gwprefix Drop gateway prefix when call from IP (0=Keep, 1=Drop).
-eod End of dial (0=Disable, 1=Enable).
-silence Detect silence voice (0=Disable, 1=Enable).
-ring The ring time for ring detection.(Uint:ms)
-r b a Ring before answer.(For 1 ~ 10)
-delay Delay to send DTMF (For 1 ~ 5 sec).
-connect Auto connect time.
(0=Disable, for 1~65535 sec)
-fxot y p e fxo type.(0=Normal, 1=Force 2nd dial)
-hwtype Hardware type (0=Auto, 1=1FXS+1FXO, 2=2FXS+2FXO).
-hwver Hardware version (0=Auto, 1=1.X, 2=2.X).
Example: sysconf -idtime 5
Parameters Usage:
print out all current settings
-idtime
set the duration(in second) of two pressed digits in dial mode
as timed out. If after the duration user hasn’t pressed next
number, it will dial out all number pressed. (1-10 seconds)
-keypad
DTMF replay type. When value is “0”, Gateway will transfer
DTMF signal via In-Band type, “1” via H.245 UII Alphanumeric,
“2” via H.245 UII Signal Type, and “3” via Q.931 UserInfo, and
“4” via RFC2833 type. Users can adjust the value according
to various applications.
-prefixsw
switch on/off prefix function. If user enables prefix function,
once user dials out, gateway will automatically add prefix
number before number user dialed.
-prefixdisab set disable key (0,1,~9, *) to disable the prefix function in
