FXSO H.323 Gateway User Manual
Document Ver.: 105
Release Dec, 2004
39
3.7 System Configuration
Figure 3.9: System Configuration
u
Inter Digit Time – The call will be sent out if user didn’t enter the digits after
this timer.
u
Forward time – It supports the No Answer Forward function. If users
configure it for 10, the call will be forwarded when it rings about 10
seconds. From 5 to 65535.
Support the FXS type only
.
u
Keypad Type – User could define the keypad for the DTMF sending.
n
In-Band : The DTMF signal sending by RTP.
n
Out-Band : The DTMF signal sending not by RTP. Including the
H.245(Alp ha), H.245(Signal), Q.931 and RFC 2833.
u
User Defined Prefix Switch – Select on/off for User defined local zone
prefix switch. If user enables prefix function, once user dials out, gateway
will automatically add prefix number before number user dialed.
u
User Defined prefix Disable – Disable the defined prefix after press the
selected digit (0,1~9, *).
u
User Define prefix – This will be added in the first digits of the numbers
that users had dialed. Can also define IP address here in P2P mode, once
user press “#”, Gateway will call out this IP address.
u
Codec Select Method – This could support that the codec will follow the
MSD (MasterSlaveDetermination) or the caller side.
