7
Rear Panel
Power Connector:
To connect the included power adapter.
Network Connector: RJ-45 connector, Gigabit Ethernet port.
VGA Output:
Connect to LCD monitor for locally display (D-Sub connector).
HDMI Output:
Connect to LCD monitor for locally display (HDMI connector).
HDMI/VGA Switch:
The switch to determine which display port (HDMI or VGA) to
output the image.
Terminal Block:
The terminal block provides the following functionalities:
8 Sets of Digital Input
2 Sets of Relay Output
RS-485
I/O Connections
I/O terminal connector:
8 sets of Digital Input (Alarm In + GND) – The digital inputs for connecting devices
that can toggle between an open and closed circuit, such as PIRs, door/window
contacts, glass break detectors, etc. When a signal is received the status changes
and the input becomes active.
2 sets of Relay Output (N.O. + COM or N.C. + COM) –The output to Relay switch
of the alarm device such as LEDs, Sirens, etc.
