20
Pattern 1~4: To make camera patrol the selected
pattern. Pattern is a function allows you create
specific path with individually-defined stops. You can
create the pattern in
OSD Menu
Scan
Pattern
.
Selected Group: To make camera move around all the
selected groups. You can select the groups in different
combinations in
OSD Menu
Scan
Tour Scan
.
Selected Point: To make camera move around all the
selected presets (among 1 to 32). You can select the
presets in
OSD Menu
Scan
Patrol
.
Start “Patrol”:
Click
button.
Stop “Patrol”:
Click
button.
Auto Pan :
Click
button to open the Auto-Pan control panel.
This camera provides 3 modes for auto pan function.
Pan/Tilt
(L<->R)
Continuous panning
between two
positions A and
positions B:
The position A can be set by clicking
button
(Left-Limit); the position B can be set by clicking
button (Right-Limit).
Start “Auto Pan”:
Click
button.
Stop “Auto Pan”:
Click
button.
Other
Mode
Choose the Auto
Pan mode from the
pull-down list. There
are 2 modes are
available:
Auto Pan-Only: This is for continuous panning between
two positions A / B. Camera will not move in vertical
direction, however. To start this mode, please enter
OSD Menu
Scan
Auto Pan
Pan Only
and
complete the settings of start position, end position,
moving speed and dwell first.
Auto Pan-Circle: To perform continuous panning in 360
o
.
To start this mode, please enter
OSD Menu
Scan
Auto Pan
Circle
and complete the settings of
Содержание CAM633
Страница 12: ...11 Relay Output COM Common pin N O Normally Open Max 1A 24VDC or 0 5A 125VAC...
Страница 13: ...12 C Monitor Setting 1 Right Click on the desktop Select Properties 2 Change color quality to Highest 32bit...
Страница 17: ...16 1 2 3 4 5 When popup the following dialogue box click Yes...
Страница 37: ...36 C Network Setting Network Setting Network Setting...
