9
Cables Connection
1. Connect the cable of Digital I/O, Video output, Audio output and Audio input if you want
to use these functionalities.
2. Connect Ethernet cable for network connection.
3. Connect power adapter to turn on the camera.
5. If the camera is PoE model, the power adapter is not necessary. The camera will get
the power from the PoE injector or PoE switch.
PoE (Power over Ethernet) is a technology that integrates power into a standard LAN
infrastructure. It enables power to be provided to the network device, such as an IP
phone or a network camera, using the same cable as that used for network connection.
It eliminates the need for power outlets at the camera locations. Please follow the
below figure for the connection.
4. Set up the network configurations according to the network environment. For further
explanation, please refer to
Network Configuration
chapter.
I/O Connections
Purple: Digital In 1
Red:
Digital In 2
Black:
GND
Brown: Relay Out 1 (N.O.)
Orange: COM 1 (for Relay Out 1)
Gray:
Relay Out 2 (N.O.)
Blue:
COM 2 (for Relay Out 2)
PoE Switch or PoE Injector
Ethernet Cable
Data only
Ethernet Cable
Mixed data and power
PoE Network Camera
To Network
Содержание CAM633
Страница 12: ...11 Relay Output COM Common pin N O Normally Open Max 1A 24VDC or 0 5A 125VAC...
Страница 13: ...12 C Monitor Setting 1 Right Click on the desktop Select Properties 2 Change color quality to Highest 32bit...
Страница 17: ...16 1 2 3 4 5 When popup the following dialogue box click Yes...
Страница 37: ...36 C Network Setting Network Setting Network Setting...
