27
the port if you want to use router’s NAT (Network Address Translation) to make this
device can be linked from Internet.
RTP Port:
Set the port range of RTP port.
In RTSP mode, you may use TCP and UDP for connecting. TCP connection uses
RTSP Port. UDP connection uses RTP Start and End Port.
UPnP
Enable or disable the UPnP protocol.
This device supports UPnP, If this service is enabled on your computer, the device will
automatically be detected and a new icon will be added to “My Network Places”.
Note: UPnP must be enabled on your computer.
Please follow the procedure to activate UPnP:
1. Open the “Control Panel” from the “Start” menu.
2. Select “Add/Remove Programs”.
3. Select “Add/Remove Windows Components” and open “Networking Services” section.
4. Click “Details” and select “UPnP” to setup the service.
5. The network device icon will be added to “My Network Places”.
6. You may double-click the network device icon to access it via IE browser.
After set up, click [Apply] to save the settings.
