ASM Zip-Clean 2730B, Руководство по эксплуатации

Страница: 6 / 14

6
309424
1
.
Check engine oil level.
Startup
Always use this startup procedure to ensure the Zip Clean is started safely and properly.
D
Always engage gun trigger safety latch when you stop spraying. This reduces the risk of fluid
injection or splashing in eyes or on the skin if the gun is bumped or triggered accidentally.
D
Observe all CAUTIONS in this section to avoid costly damage to Zip Clean.
.
Operation
NOTE: All Zip Clean powered with Honda engines are equipped with an engine low-oil sensor that shuts the
engine off if oil level falls below a certain level. If engine stops unexpectedly, check oil and fuel levels. Check oil
level each time you add fuel.
2. Check fuel level.
Oil level
Fuel level
3
.
Check oil level in pump. It should be half way up the sight
glass. Add pump oil as necessary. The system is
equipped with a thermal overload to help prevent severe
damage.
NOTE: It is important to drain and refill the pump oil after the first 50 hours of operation.