ASM Zip-Clean 2730B, Руководство по эксплуатации

Страница: 7 / 14

7
309424
4
.
Turn on water supply.
5
.
Trigger the gun until a constant stream of water sprays from the tip
indicating the air is purged from the system.
6
.
Open fuel shutoff valve. Be sure the spark plug ignition
cable is pushed firmly onto the spark plug.
7
.
Put the switch in the ON position and the throttle at HALF
throttle.
Be sure water supply is completely turned on
before running Zip Clean. Running Zip Clean
without water will damage the pump.
CAUTION
Do not allow Zip Clean to idle for more than 10
minutes. This causes recirculating water to
overheat and serious damage to pump. Turn off Zip
Clean if it will not be spraying at least every 10
minutes. If heated water is used, reduce this time.
Do not operate Zip Clean with inlet water screen
removed. This screen helps keep abrasive
sediment out of pump, which could clog pump or
damage cylinders. Keep screen clean.
Do not pump caustic materials, such materials could
corrode pump components.
CAUTION