-29-
3. Touch it to restore all settings on “SIP config” and create 2 SIP accounts, one
for DX monitor and one for 2Easy APP. Server will apply to restore two accounts’
password to default, and register it. Only when:
If your DX monitor is not brand new, we suggest you touch “Use default”
before testing.
2Easy APP is not able to register on server
4. Touch it, DX monitor will apply to clean all SIP “contact” on server, and also
will try to register itself to server, with this function it will helps when:
2Easy APP is not able to get push notification.
DX monitor has connect with Wi-Fi, but “Server” icon with “!” or “x” beside.
1. Touch it to enter about interface.
Device Type:
S/W Ver:
Serial No:
Node ID:
DPM-D277TMW
V1.0.0.171110111114
040019b93333
200
IP Address:
192.168.01.100 linked
Setting
Call Tune
General
Installer
Wireless
About
About
Device Type
: the device name.
S/W Ver
: the sofeware version.
Serial No
: the device serial number.
Node Id
: Node ID number.
IP Address
: the device IP address.
H/W Address
: the device Mac address.
Subnet Mask:
the device subnet mask.
Default Route
: the device default route.
DT Address
: the device code number.
M/S Code
: show the device is a master monitor or sub monitor.
Online
: show the numbers of sub monitor.
