Page | 4
Safety instructions when
connecting the appliance to
the mains supply
DANGER
Risk of electric shock
To avoid the risk of electric
shock through contact with
live parts the following safety
instructions must be
observed:
If the electric supply cord is
damaged it should only be
replaced by a service
engineer appointed by the
manufacturer or distributor.
The voltage of the power
source must be the same
as that specified on the
rating plate.
Before use check that the
appliance functions
properly. The appliance
should not be used if:
- the electric supply cord
is damaged
- it shows signs of
noticeable damage
- it has been dropped
CAUTION
To avoid the risk of personal
injury or damage to the
appliance always follow the
instructions for installation,
use and maintenance.
If you give the appliance to
another person then you
should also supply them
with the operating
instructions.
Connect the appliance only
to an AC supply. Do not pull
the supply cord over sharp
edges, clamp it in place or
allow the appliance to hang
by its supply cord. Keep the
supply cord away from hot
or damp areas
Never wind the supply cord
around the appliance.
Only insert the mains plug
when the appliance is
switched off.
Содержание E005055
Страница 2: ...Page 2 ...