Page | 8
Appliance specifications
Name:
Cordless kettle with
power base.
Model no:
E005055
– UK plug
Mains cord :
Max. 0.75 m
Power supply:
220-240V ~ / 50 Hz
Rated input:
750W
– 900W
Filling level :
Max. 1.0 litres
Heating system :
Stainless steel element
Dimensions :
220mm(H) x 190mm(W)
Weight:
Approx. 570 g
Protection
category:
Class I (earthed)
CE compliance:
The appliance complies
with EU Directives EMC 2004/108/EC and
Low Voltage 2006/95/EC.
f
Parts
1. Spout (plus filter)
2. Lid
3. Kettle body
4. Water level window
5. Power base
6. Supply cord
7. On / off switch
8. Handle
9. Lid release lever
Intended use
The appliance is
only intended for boiling
water. Never put milk, soup, coffee, tea or
rice, etc. into the kettle.
No liability is accepted for any damage
resulting from use for any other purpose or
unauthorised repairs. Warranty is void for
damage or failure caused by negligence or
misuse.
The kettle is not intended for catering
purposes.
AIRER
Initial use & operation
Before using the kettle for the first time fill it
up to the maximum level (1.0 litres) and boil
it. Rinse the kettle with clean water and
repeat.
When connecting the power base “5” to the
mains supply follow the relevant safety
instructions
Using the kettle
Filling with water
Open the lid “2” with the lid release lever
“9” and fill the kettle.
Check the filling level in the water level
window “4”.
Note
If the kettle is accidentally started empty, the
safety cut-out will automatically switch it off.
In this case you should remove the kettle
from the power base and allow it to cool
down fully. Make sure that there is water in
the kettle before using it again.
Switching on
After filling close the
lid “2” securely.
Position the kettle on the power base
and c
onnect the power base “5” to the
mains supply.
Note
If the lid is not closed properly the kettle will
not shut off automatically.
Содержание E005055
Страница 2: ...Page 2 ...