background image

User Manual PS 260 / Issue 1 © 1994  ASL Intercom, Utrecht, Holland.

5

5.0

REAR PANEL CONTROLS

At the rear panel you will find the connectors for intercon-
necting the PS 260 with the ASL intercom system(s) and
the connectors for connecting 4-wire systems or audio
equipment.

8

AUDIO INPUT connector

10 INTERCOM IN connector

This XLR-3 connector is for placing an audio signal on

This XLR-3 connector is for connecting the intercom

the intercomline. It is electronically balanced in the

line.

standard version.

Pin assignments  :

An extra balancing transformer is optional (PS 260/T).

1. 0V / ground shield

Pin assignments :

2. +30V power wire

1. 0V / ground shield

3. audio wire

2. 
3. signal -

9

AUDIO OUTPUT connector
This XLR-3 connector is for monitoring the intercom

connector and has the same pin assignments.

line.
It is transformer balanced and capable of driving a 600
ohms load.
Pin assignments :

1. 0V / ground shield
2. 
3. signal -

11 INTERCOM LINK connector

This output is for extending the intercom line to other
user stations. It is linked to the intercom line input

6.0

SUM OUTPUT(S)

The PS 260 offers you the possibility of monitoring both
intercomlines with one interface.

function

:

Output of interface 1,

When one interface monitors two intercom lines, both

action

:

Connect the left tag of interface 1 with the

audio signals of the intercomlines will appear on the audio

right tag of interface 2.

output connector

Changing procedure  :

function

:

Output of interface 2, 

a. Unscrew the upper cover plate and slide it backwards.

action

:

connect the left tag of interface 2 with the

b. Place the unit in front of you, facing the front panel.

c. Depending on which kind of monitoring you need, the

function

:

Outputs of interface 1 and 2 monitor

following procedures should be followed (next column)

intercom lines 1 + 2

d. Screw the cover plate back in place.

Connection A 

monitors intercom lines 1 + 2 

Connection B 

monitors intercom lines 1 + 2.

right tag of interface 1.

Connection A + B

action

:

cross connect the tags.

Содержание PS 260












Отзывы: