ASL INTERCOM F200, Быстрый старт

Страница: 30 / 73

Operating the F200
Press the ‘ Yes ’ soft key the channel selection menu will be displayed.
Chan 1
<
- + >
Press the ‘ No ’ soft key to exit configuration mode and
return to measurement mode.
Press the ‘ ’ or ‘ + ’ soft key to decrement or increment the channel number.
Press the ‘ Enter ’ key to select the input channel and return to the channel set up menu.
4.1.4 Statistics
The instrument automatically records maximum and minimum readings during its operating period.
Statistics
Min Max
Select the Statistics menu using the ‘ Menu ’ key.
Press the ‘ Min ’ soft key to display the current minimum value.
Press the ‘ Max ’ soft key to display the current maximum value.
Press the ‘
Clear
’ key to clear the current statistical values.
Press the ‘ Menu ’ key to exit configuration mode and return to measurement mode.
The statistical values are also cleared when the units are changed and at power on.
4.1.5 Options
From the Options menu you can select to calibrate the instrument, set the RS232 communication talk
only mode or review the model number, firmware version and instrument serial number.
Options
Cal
Com Ver
Select the Options menu using the ‘ Menu ’ key.
4.1.5.1 Calibrate the instrument
Refer to Section 6 to calibrate the instrument.
4.1.5.2 Talk only mode
In Talk only mode the instrument ignores all received serial communication commands, on completion
of each measurement cycle the channel number, measurement value and units are automatically
output over the RS232 serial communication port.
Talk only Off
On Off
Select the ‘ Com ’ soft key; the Talk only selection
menu is displayed.
Press the ‘ On ’ soft key to set RS232 serial communication Talk only mode on.
Press the ‘ Off ’ soft key to set RS232 serial communication Talk only mode off.
Press the ‘ Menu ’ key to exit configuration mode and return to measurement mode.
F200-14-001 Page 4-5
ASL 2003