B
A
D
C
BT Pairing Switch
Directional LED Indicators
A
B
Power Light
On / Off Attendant Switch
The Switch Timer sets two functions:
1.
Sets the time on the MODE Port to give the option to ‘long hold’ on the reset switch to change modes in
the R-NET and Q-Logic programming. This allows the user to press and hold or double tap on the reset
switch to change modes. (
Reset switch must be plugged into the MODE Port on the ATOM Head Array.)
2.
Sets the length of time for the ’long hold’ on the User Port.
*
The timer sets the time for both the USER and MODE Ports.
SWITCH TIMER
E
Adjustable Switch Timer for User and Mode Switches
C
D
E
F
M
E
D
Protective Cover in Use
M
N
Protective Cover
N
Protective Cable Guides
Magnetic Cover - Closed (
Left
)
M
Shown Open (
Pg 2 - Top Left
)
MOUNTING OPTIONS
CHAIR
ASL 606 Multi Axis
Adjustable/Removable
Headrest Mounting
Hardware
HEAD ARRAY SIZES
P R OTO N W I N G
3”h X 2”w
C U R V E D W I N G
5”h X 3.25”w
E L E M E N T
3”h X 2”w
S TA N DA R D W I N G
3.25”h X 1.5”w
EXPLANATION OF PARTS
ELEC TRONIC HEAD ARRAY - INTERFACE
User Switch / Change Ports
User Switch Mono Port
Mode Change Mono Port
Reverse / Mode Change Port (Powered)
Left (Powered)
Forward (Powered)
Right (Powered)
K
L
G
H
I
J
G
H
I
J
L
K
ON
OFF
2
3
6
5
4
1
Switch 1
changes the properties of the powered port (SEL) from mode change to reverse. When it is
turned ON, it will act as a mode/reset switch, and when it is OFF, it will act as a reverse switch.
Switch 2
is the BT pairing switch. When it is ON, the head array
will be available to be discovered by a BT device.
Switch 3
changes the Power Up option. When turned to the ON
position, the ATOM will power on when the chair is powered on.
When in the OFF position, the ATOM will need to be manually
turned on using the ON/OFF attendant switch.
Switch 4
is a future use function.
Switch 5
is a future use function.
Switch 6
when in the ON position, provides an audible beep that indicates that a switch is being
activated. When in the OFF position, the activation will be silent.
F
DIP SWITCH SETTINGS
RESET SWITCHES & MOUNTING OPTIONS
ASL 204 USB
Non-Adjustable Proximity
Sensor with Micro USB
Connector
ASL 320 Pulse
Mechanical Switch
ASL 314 Ultra
Light Switch
ASL 826 Micro USB to
Mono Jack Cable
ASL 930B Swing Away
Mechanism (Dual)
ASL 611 Arm Rest
Switch Mounting Bracket
ASL 930 Swing Away
Mechanism (Single)
ACCESSING THE BLUETOOTH MODE
There is one Bluetooth output on the
ATOM Electronic Head Array. You can
access the Bluetooth output with a
“press and hold” of the User Switch or
the Attendant On/Off Switch.
ONE BEEP = HEAD ARRAY ON
TWO BEEPS = HEAD ARRAY OFF
LONG BEEP = IN BLUETOOTH MODE
B L U E T O O T H M O D E
