Asko WM70, Руководство по обслуживанию

Страница: 34 / 60

Service manual WM70
34
Service menu WM70.3 cont.
Test motor, Testing Motor, Test motor,
Motortest, Tester motor, Test av
motor, Moottoritesti, Essai moteur,
Motor testen, Test motore, Test
motor,
Teст мoтoрa , Test motor
The motor is running at normal action (49 rpm)
Test drain, Testing Drain, Test
drain, Tömningstest, Tester
udpumpning, Test av tømming,
Tyhjennyspumpputesti, Essai
vidange, Abfluss testen, Test scarico,
Test drenaje,
Teст нaсoсa , Test
afvoerpomp
Drain pump is on. Pressure sensor value is shown in LCD 2
Test spin, Testing Spin, Test
spin, Centifugeringstest, Tester
centrifugering, Test av sentrifugering,
Linkoustesti, Essai essorage,
Schleudern testen, Test centrifuga,
Test centrifugado,
Teст oтжимa , Test
centrifugeren
A Spin sequence is performed, the drain pump is running. Unbalance value is
shown in LCD 2.
Test door, Testing Door, Test door,
Dörrtest, Tester luge, Test av dørlås,
Luukun lukon testi, Essai porte, Luke
testen, Test sportello, Test puerta,
Teст зaмкa двeрцы , Test deurslot
Door lock is activated, the door is then opened.
Press to exit the service menu
0
Setting amount of water taken into the machine. Default value is ”0”.
-15%
-10%
-5%
+5%
+10%
+15%
Press to exit the service menu
0
Adjust LCD contrast Default value is ”0”.
+3
+2
+1
-1
-2
-3
Press to exit the service menu
1500 Setting maximum speed. Default value is ”1600 rpm”.
1600
1700
1800
Press to exit the service menu
Reset
Language US English, English, Svenska, Dansk, Norsk, Suomi, Francais,
Deutsch, Italiano, Esoanol,
Русский, Nederlands