Asko WM70, Руководство по обслуживанию

Страница: 21 / 60

Service manual WM70
21
Options selection WM70.3 cont.
Press/
turn
LCD 2 Comments/instructions
Normal water level, Normal Water
Level, Normal water level, Normal
vattennivå, Normal vandstand, Normalt
vannivå, Normaali vedenpinta, Niveau
d’eau normal, Normaler Wasserstand,
Livello acqua normale, Nivel normal
de agua, Hoрм.урoвeнь вoд , Normaal
waterniveau
High water level
Can be selected in programs: 4, 5, 6, 7, 8 and 9. Cannot be selected
during No spin and No draining.
With this option selected, extra water is taken in after approximately
15 minutes, the extra water is used in the main wash and rinses.
High water level, High Water Level,
High water level, Hög vattennivå,
Høj vandstand, Høyt vannivå, Korkea
vedenpinta, Niveau d’eau élevé, Hoher
Wasserstand, Livello acqua alto, Nivel
alto de agua, Bысoкий урoвeнь вoды ,
Hoog waterniveau
The following only applies to program 3, the time program.
Start, Start, Start, Start, Start, Start, Start,
Démarrer, Start, Avvio, Inicio,
Стaрт ,
Start
Delayed start (when setting: ”No Real time”)
The start of the selected program can be delayed for up to 24 hours
(in half an hour intervals). The delay and program time is shown in
the display.
Start - Done, Start-End, Start-Done,
Start-Klar, Start-Færdig, Start-Ferdig,
Start-Valmis, Démarrer-Fin, Start-Fertig,
Avvio-Fine, Inicio-Fin,
Стaрт-Кoнeц
,
Start-Gereed
Delayed start (when setting: ”24 Hour Clock ” or ”12 Hour Clock”)
The start of the selected program can be delayed for up to 24 hours
(in half an hour intervals). Start and end times are shown in the
display.
Start, Start, Start, Start, Start, Start, Start,
Démarrer, Start, Avvio, Inicio,
Стaрт ,
Start
Time program (when setting: ”No Real time”)
Desired program time can be set. Selections up to 3 hours in units of
15 minutes can be made. The selected program time is shown in the
display.
3:00
Start - Done, Start-End, Start-Done,
Start-Klar, Start-Færdig, Start-Ferdig,
Start-Valmis, Démarrer-Fin, Start-Fertig,
Avvio-Fine, Inicio-Fin,
Стaрт-Кoнeц ,
Start-Gereed
Time program (when setting: ”24 Hour Clock ” or ”12 Hour Clock””)
Desired program time can be set. Selections up to 3 hours in units
of 15 minutes can be made. Start and end times are shown in the
display.