Asko WM70, Руководство по обслуживанию

Страница: 30 / 60

Service manual WM70
30
Option selection WM70.1
Turn/
Press Program Description
8. Wool/Hand A gentle laundry program for wool, silk and garments
that should be washed by hand. The highest
available temperature is 40°C. This program
has a short spin. The maximum spin speed is 800
rpm.
9. Rinse program This program performs one cold rinse cycle +
spin. Suitable for laundry that just needs to be
dampened and for cleaning cloths and mops
10. Spin/Drain Used to just spin the wash. If you only want to
drain the machine of water, select the.
symbol
(no spin)
Press the start/Stop-button to start the program
Press Description
40°
30°
20°
95°
60°
50°
Select the temperature by pressing the button until the LED by the desired temperature lights.
You can select temperatures between 20°C and 95°C. For Wool/Hand you cannot choose a temperature
higher than 40°C, when choosing Synthetics or Easy care the maximum temperature is 60°C.
400 1600
1200
800
• Select the spin speed by pressing the button until the LED by the desired speed lights.
• You can select speeds between 400 and 1600 rpm, No spin or No drain. A spin with a speed of 400-
800 rpm is always a short spin. (Some models up to 1200 respectively 1400 rpm)
• You cannot choose a spin speed higher than 800 rpm for Wool/Hand
and Synthetics
• No spin ( ) means that the program does not include a spin cycle and ends by draining.• No draining( )means
that the program does not include a spin cycle and ends with the water from the final rinse still
in the machine. The washing will remain covered by the water from the final rinse and therefore will
not become creased
• If you only want to drain the machine of water, select the Spin & drain program
Aviable only on some models with 6 options.
• Select Super wash ( )by pressing the button by the symbol.
• An LED next to the button lights when this option is activated.
• Super wash can be selected to better dissolve difficult stains and heavy soiling on clothing. The main wash time in
cold water is extended by approximately six minutes. The main wash time is also extended.
• This option cannot be selected with the auto,heavy,white and quick colours programms.
• Select High water level ( )by pressing the button by the symbol.
• An LED next to the button lights when this option is activated.
• High water level means that additional water is used during the main wash and rinse cycles. This option can be used
with all programmes except Wool/Hand, rinse and spin/drain.
Note!
The machine takes in the additional water for the high water level about 15 minutes after the main wash has started.
• Use the Super rinse ( )option if you want to increase the number of rinses. The maximum number of rinses is
seven and varies depending on the selected programme. This option cannot be selected with rinse and spin/drain
• Select Super rinse by pressing the button by the symbol.
• An LED next to the button lights when this option is activated.
• Select Delayed Start ( ) by pressing the Time button. You can delay the start by between 1 and 24 hours,
the time is shown in whole hours. The LED next to the Time button shows that Delayed Start has been
activated.
The machine counts down 1 hour at a time and starts after the selected delay.
Note!
Make sure the detergent compartment is completely dry before you add detergent, otherwise there is
a risk that the detergent will clump before the machine starts.
Press the Start/Stop button to start program