Asko TL751 XXLT, Руководство по обслуживанию

Страница: 38 / 61

37
Thermostat Control
1. Function
• This is a bimetal-type switch which controls the heater operation.
• If the heater is too hot, this thermostat stops the heater and after the heater
is cooled down, it restarts the heater.
2. Specification
• A bimetal thermostat with the terminals normally connected
• Electric rating : 25A at 125V
• Opening temperature :
257°F (
125°C
) ±5
, Closing temperature :
201°F (
94°C
) ±5
• Type name : 60T
3. Checking method of malfunction
• After 3 minutes of the air dry program, the terminals of this part are c
losed
.
• Press the power and start buttons while you push the door switch after opening the door.
• Check if the heater operates after the drum starts rotating.
(To do this, check if the heater turns red or feel warm air in the drum with your hands).
• If the heater operates, run the air dry program for more than 3 minutes after closing the door.
• Switch off the power and measure the resistance between the terminals. If the value is greater than 1,
replace the switch.
4. Procedure of replacement
1
Remove the back cover.
2
Check the position of the part
3
Remove the wires and screws to disassemble the part.
4
Assemble the parts in reverse order.
Part Code : 3619047600
Thermostat Control