Asko TL751 XXLT, Руководство по обслуживанию

Страница: 26 / 61

25
2-8. TEST Mode
1) PCB TEST MODE
A. How to enter the mode:
Turn
the power on while pressing Dry Sensor and Temp. buttons.
B. Operation order : check load by pressing Dry Time button continually.
Fixed resistance of the temp sensor : 1.7 K
Ω
2) TEST MODE
A. How to enter the mode:
Turn
the power on while pressing Dry Sensor and Dry Time buttons.
B. Operation order: check load by pressing Dry Time button continually.
No. Operation Load Time (Sec) DISPLAY Miscellaneous
1 F PCB LED ALL On 6.0 ALL LED
2 Humidity sensor check 2.0 1 : xx
3 Temp sensor check 2.0 2 : xx
4 Door S/W check 2.0 dc --> do
5 Motor check 2.0
6 Heater-Outer check 2.0 H1
7 Heater-Inner check 2.0 H2
8 Power off 0.3 F
Total time 18 seconds
No. Operation Load Time (Sec) DISPLAY Miscellaneous
1 Motor On 0.5 1 : nr
2 Heater 1 on 0.5 2 : H1 Current : 13A
3 Heater 2 on 0.5 3 : H2 Current : 23.5A
4 Heater 1, Heater 2 off 0.5 4 : nr
5 Humidity sensor check 1.0 5 : number Check based on the
variations of numbers
6 Temp sensor check 0.5 6 : number Surrounding temp indicated
Open the door at 6th pressing 0.5 6:00 Motor off
Press the start button 0.5 6: number (Motor on) Door S/W check
after closing the door.
Power off 0.3 Power section
Total time About 5 seconds