background image

12

Switch the hob to (standard) lock mode

One or more hotplates are active.

1.  Touch and hold the 

.

Attention! 

All previously set cooking processes 

remain active. 

The red light to the right above the 

 button and the 

On/O

  button 

 are constantly illuminated. All of the 

buttons are inactive, except the 

 button and the On/

O

  button 

2.  Touch and hold the 

 button to switch o

  lock mode 

and unlock the control panel.

Switching on the child lock

The hob is in stand-by mode. The display for each 

hotplate shows 

0.. 

1.  Touch and hold the 

 button to switch on the child 

lock. The red light to the right above the 

 button and 

the On/O

  Button 

 are constantly illuminated.

If no buttons are touched within 10 seconds, the cooking 

zone will automatically switch o

 . The child lock remains 

active. You can even switch o

  the hob.

Touch the button 

 again within 10 seconds to switch o

  

the child lock and unlock the control panel.

You must wait 10 seconds before switching the hob on 

again with the On/O

  button 

 in order to switch o

  the 

child lock.

 

NOTE!

Switch the hob to child lock mode before 

cleaning it to prevent it from accidentally 

switching on.

Stop/Go function

Stop / Go

Use the Stop / Go function to 'pause' the whole hob 

for 10 minutes while cooking. The power for all of the 

cooking zones is automatically switched o

 . This is 

convenient, for example, if a pan boiled over and you 

want to clean the hob. You can also leave the hob 

unattended for a short period of time without losing any 

settings.

Switching the hob to Stop / Go mode

One or more cooking zones are active.
1. Touch the   button once.

You will hear a single bleep is shown in the display for each 
cooking zone and the red light to the right above the   
button is constantly illuminated.
Any set cooking timers/minute minders stop.

   All of the buttons are inactive except the   ,   button, the 

button and the On/Off button  . 

If no buttons are touched within 10 minutes, all of the active 
cooking zones are automatically switched off.

1. Switching o

  Stop / Go mode

Press the   button again within 10 minutes.

The hob continues with the settings that were set before the 
Stop / Go. 

Содержание SIVK6QATX HI1654IQ

























Отзывы: