background image

422686

Oven self-cleaning - PYROLYSIS

The PYROLYSIS program allows automatic cleaning of the oven 
interior by employing high temperature (approx. 460°C) that 
causes the grease stains and other impurities to incinerate and 
thus reduces them to ashes. When the pyrolitic cleaning program 
is completed and the oven has cooled down, simply wipe the 
ashes from the oven cavity using a damp cloth. 

 Before activating the automatic pyrolitic cleaning 

cycle, carefully read and observe the instructions in 
the section Cleaning and Maintenance, in which correct 
and safe use of this function is described!

 Before activating the automatic cleaning program, 

remove the grid, grease 

fi

 lter, spit roasting set, glass 

baking trays, meat probe, and any other cookware that 
is not a part of the oven equipment.

After the end of cooking process, rotate the selector knob to 

the “zero” position. This will also interrupt and delete all timer 
functions (see the section “Setting the timer functions”); the timer 
will switch to time of day / clock display. 
After the end of cooking and when the oven is turned off, the 
temperature display will indicate the falling temperature until it 
reaches 50°C.

Turning off the oven

17

Содержание OP8611A

















































Отзывы: