Asko HI1643G, Руководство по эксплуатации

Страница: 9 / 24

9
Switching on the hob and setting the power
The power has 9 settings. There is also a ‘boost’ setting,
which is indicated by a ‘P.’ in the display (see page 15
‘Boost’).
• Put a pan on a cooking zone.
• Touch the On/O ff button.
You will hear a short bleep and the display for each
cooking zone will show ‘0.’. The red light to the right
above the On/O ff button is constantly illuminated.
If no further action is taken, the cooking zone will
automatically switch o ff after 10 seconds.
• Use the + button or the - button in the desired cooking
zone to choose the correct setting. The hob will
automatically start in the chosen setting (if it detects
a pan).
▷
Touching the + button for the first time displays setting
‘4.’.
▷
Touching the - button for the first time displays setting
‘9.’.
Tip
You can touch and hold the + or the - button to set the
desired power faster.
Pan detection
If the hob does not detect a (ferrous) pan after the
cooking power has been set, the pan detection symbol
and the selected power setting will fl ash alternately on
the display and the hob will remain cold. If a (ferrous)
pan is not placed on the cooking zone within 1 minute,
the cooking zone will automatically switch o ff (see also
page 11 and 12 ‘Pans’).
Residual warmth indicator
A cooking zone that has been used intensively will retain
heat for several minutes after it has been switched o ff .
An ‘H.’ appears in the display as long as the cooking
zone is hot.
Automatic heat-up function
The automatic heat-up function temporarily increases
the power (setting ‘9.’) to heat the contents of the pan
faster. This function is available in all settings except the
‘Boost’ setting and setting ‘9.’.
Switching on the automatic heat-up function
The hob is switched on and a pan has been placed in a
cooking zone.
• Use the + button in the desired cooking zone to select
setting ‘A.’ (comes after ‘9.’).
‘A.’ and ‘9.’ fl ash alternately in the display.
Tip
A quick way of setting ‘A.’ is by touching the - button
to set the cooking zone to ‘9.’ and then touching the +
button once for setting ‘A.’.
• Use the - or the + button to set the desired power. ‘4.’
and ‘A.’ will fl ash alternately in the display if you select
power setting 4. (Attention! After 10 seconds, the -
button works as an o ff button).
• When the pan has reached the desired temperature,
the automatic heat-up function automatically switches
o ff and the cooking zone continues at the set power.
The table below shows the duration of the
automatic heat-up function for each power setting:
Setting 1 2 3 4 5 6 7 8
Seconds 40 72 120 176 256 432 120 192
OPERATION