Asko HI1643G, Руководство по эксплуатации

Страница: 10 / 24

10
Switching o ff the automatic heat-up function
The hob is switched on. ‘A.’ and the power setting fl ash
alternately in the display.
• Touch the - button for the cooking zone.
• A di ff erent power setting is shown in the display and
‘A.’ stops fl ashing. Or:
• Select setting ‘9.’. Or:
• Touch the - and the + button for the cooking zone
at the same time. The display shows setting ‘0.’, ‘A.’
stops fl ashing and the cooking zone is switched o ff .
Boost
The ‘Boost’ function is used to cook at maximum power
for a short period of time (maximum 10 minutes). The
power is reduced to setting 9 at the end of the maximum
boost time.
Switching on the boost function
The hob is switched on and a pan is on the cooking
zone.
• Touch the P button. (You can also use this button if a
power has been set).
• Touch the - or the + button for the desired cooking zone.
• The display shows ‘P.’. The boost function is
immediately active.
If the - or the + buttons are not touched, the red light to
the right above the P button will fl ash for 3 seconds and
then stop. You will hear a single bleep.
Switching o ff the boost function
The boost function is switched on, the display shows ‘P.’.
• Touch the - button.
The display shows power setting 9, the boost function
is switched o ff . Or:
• Touch the - or the + button at the same time.
The display shows setting ‘0.’, and the cooking zone
is switched o ff .
Two cooking zones behind each other
• Two cooking zones that are behind each other
in fl uence each other. The power is automatically
distributed when these cooking zones are used at the
same time. This does not have any consequences up
to setting 9. Selecting the Boost setting for one of the
cooking zones, however, automatically switches the
other cooking zone to a lower setting.
• If one of the cooking zones is set to boost and you
want to set the other zone to setting 9 or Boost, the
cooking zone that is set to boost will automatically be
switched to a lower setting.
• Two cooking zones that are beside each other do not
in fl uence each other. You can set both cooking zones
to Boost.
Melting/keeping food warm
Use the ‘keep food warm’ button to switch on the
function to melt or keep food warm. The cooking timer is
used to set the maximum melting/ warming time.
The melt function (u) The function to keep food
warm (U)
The melt function keeps
the temperature of the
food at a constant 42 °C.
The function to keep food
warm keeps the temperature of
the food at a constant 70 °C.
Switching on the melt function
The hob is switched on and a pan is on the cooking
zone.
• Touch the On/O ff button.
You will hear a single bleep and the display for each
cooking zone will show ‘0.’.
• Touch the ‘keep food warm’ button once. This is the
melt function.
A light to the right above the ‘keep food warm’ button
illuminates.
• Touch the - or the + button for the desired cooking
zone.
The display shows ‘u.’.
Switching on the function to keep food warm
• Repeat step 1 (see above).
• Touch the ‘keep food warm’ button twice. This is the
function to keep food warm.
Two lights to the right above the ‘keep food warm’
button light up.
• Touch the - or the + button for the desired cooking
zone.
The display shows ‘U.’.