Asko DW Outdoor, Руководство по обслуживанию

Страница: 26 / 28

Service manual DW Outdoor
26
Service and installation
Ensure that both door springs are attached so
that the door does not open and tip the machine.
Put your foot on the base and lift the cleaning compartment up. Hang the cleaning compartment
on the two screws previously placed in the rear holes on either side of the machine.
Overfl ow guard wiring
For service visits where the micro switch for the overfl ow guard is disconnected it is important
that the cables are correctly reattached. If reattached incorrectly the machine will not start.
Connect the 2-pin connector (2) to the two upper pins on the micro switch and the single pin
connector (1) to the lowest pin.
2
1
If the machine has door springs that can be
adjusted from the front and is fi tted with a
water softener, the right door spring may need
to be fully tensioned. Otherwise the spring
mount may catch on the water softener when
the cleaning compartment is lifted.