EN 16
USE
Indications in the hob display
In display
Status
Power setting cooking zone; 1 = low setting / 9 = high setting
Boost function active.
No (suitable) pan on cooking zone (pan detection symbol).
Bridge cooking zones are connected
Timer function selected
The power level available for the selected cooking zone has been exceeded.
Consult chapter ‘Power level setting’.
Residual heat indicator; The hob has a residual heat indicator for each cooking
zone to show those which are still hot. Although the hob is switched Off, the
indicator ‘H’ will remain on for as long as the cooking zone is hot!
Avoid touching them when this indicator is lit.
Danger! Risk of burns.
Fault codes; See ‘Troubleshooting table’.
Induction noises
A ticking sound
This is caused by the capacity limiter on the left and right zones. Ticking can also occur at
lower settings.
Pans are making noise
Pans can make some noise during cooking. This is caused by the energy flowing from the hob
to the saucepan. At high settings this is perfectly normal for some pans. It will not damage either
the pans or the hob.
The fan is making noise
To enlarge the lifespan of the electronics, the appliance is equipped with a fan. If you use the
appliance intense, the fan is activated to cool down the appliance and you will hear a buzzing
sound. The fan runs on for several minutes after the hob has been switched Off.
Содержание CI96374W
Страница 1: ...Instructions for use COOKER CI96374W ...
Страница 2: ...EN Manual EN 3 EN 38 Pictograms used Important information Tip ...
Страница 39: ...EN 39 ...