Asian Electron 1U1KVA Series, Инструкция по эксплуатации

Страница: 9 / 18

8
WARNING!
Any damages caused by using incorrect RS232 cable will be outside
of our warranty scope. If you are not sure which one is correct
RS232 cable, please purchase the correct RS232 cable from us
directly.
2-2-4 Connect chassis ground terminal to earth or to vehicle chassis using # 8 AWG wire.
WARNING!
Operation of the inverter without a proper ground, connection may
result in an electrical safety hazard.
WARNING!
Shock Hazard. Before proceeding further, carefully check the inverter
is NOT connected to any batteries, and that all wiring is
disconnected from any electrical sources. Do not connect the output
terminals of the inverter to an incoming AC source.
2-3 Installation:
Where to install.
The power inverter should be installed in a location that meets the following requirements.
2-3-1 Dry – Do not allow water to drip or splash on the inverter.
2-3-2 Cool – Ambient air temperature should be between -20
℃
and 50
℃
, the cooler the better.