Ashton STAGEPERFORMER500, Руководство пользователя, Страница: 19 / 44

MEMORY:
The memory feature can be used to preset 48 complete control-panel set-ups which could be called upon whenever needed.
BANK:
There are 8 banks in total, each bank has 6 memories (M1 - M6)
Press the (BANK) button, the LCD displays “00x Mem Bank”, with 00x showing the
Bank that has been selected. Use the (YES/NO) buttons or (DIAL) to set the bank
parameter.
STORE AND LOAD:
Press and hold the (STORE) button,
then press the (M1) button or (M2
- M6), the current datas will be stored
in them. Press the (M1) button or
(M2 - M6) to load the data’s from
the banks and replace the current
parameters. To set all memory data’s
to default press the (STORE) and (M1)
buttons together when powering on
the keyboard.
DATA’S STORED:
The data parameters that can be stored to the memory are:
Voice R1, Voice R2, Voice L, Sustain, Style, Tempo, Function, Mixer, Accomp Volume and Octave.
ONE TOUCH SETTING:
One touch setting is a powerful and convenient function that allows you to re-
configure all settings instantly with the touch of a single button. In this function, 4
types of parameters (M1 - M4) will be loaded for operating the current style.
To turn the O.T.S function on/off press the (O.T.S) button. The flag will appear on
the LCD to indicate it is enabled.
Press any of the (M1- M4) buttons, it will load the relative parameter according to
the current style. Chord mode is automatically on when in O.T.S mode.
Press any of the (M1 - M4) buttons that correspond to your current settings.
- Page 16 -
STAGEPERFORMER_500.indd 20 6/3/08 12:07:54 PM